SKAPS
TRANSNETTM
HDPE GEONET TN 330SKAPS
TRANSNETTM geonet
consists of SKAPS GeoNet made from HDPE resin |
| Property |
Test Method |
Unit |
Required Value |
Qualifier |
| Mass per unit area |
ASTM D
5261 |
lb/ft2 |
0.3 |
Minimum |
| Thickness |
ASTM D
5199 |
mil |
330±30 |
Range |
| Carbon Black |
ASTM D
4218 |
% |
2 to 3 |
Range |
| Tensile Strength |
ASTM D
5035 |
lb/in |
100 |
Minimum |
| Melt Flow |
ASTM D 12383 |
g/10 min |
1 |
Maximum |
| Density |
ASTM D
1505 |
g/cm3 |
0.94 |
Minimum |
| Transmissivity |
ASTM D
4716 |
m2/sec |
3.5x10-3 |
MARV2 |
Notes:
- Transmissivity measured using
water at 21 ± 2°C (70 ± 4°F) with a gradient of 1.0 and a
confining pressure of 15000 psf between stainless steel plates
after 15 minutes. Values may vary between individual labs.
- MARV is statistically defined as
mean minus two standard deviations and it is the value which is
exceeded by 97.5% of all the test data.
- Condition 190/2.16
|
| This
information is provided for reference purposes only and is not
intended as a warranty or guarantee. SKAPS assumes no liability in
connection with the use of this information. |
|
Print This Page
You need Adobe Acrobat Reader®
to print this specification page. If you don't already have this
installed on your computer, you may download it for free by clicking
on the Acrobat link below.
 |
