SKAPS GT-116
SKAPS GT-116 is a needle-punched nonwoven geotextile made of 100% polypropylene staple fibers, which are formed into a random network for dimensional stability. SKAPS GT-116 resists ultraviolet deterioration, rotting, biological degradation, naturally encountered basics and acids. Polypropylene is stable within a pH range of 2 to 13. SKAPS GT-116 conforms to the physical values listed below:
| PROPERTY | TEST METHOD | UNIT | M.A.R.V. (Minimum Average Roll Value) |
| Weight (Typical) | ASTM D5261 | oz/yd2 (g/m2) | 16.0 (542) |
| Grab Tensile | ASTM D4632 | lbs (kN) | 380 (1.69) |
| Grab Elongation | ASTM D4632 | % | 50 |
| Trapezoid Tear Strength | ASTM D4533 | lbs (kN) | 145 (.644) |
| CBR Puncture Resistance | ASTM D6241 | lbs (kN) | 1080 (4.82) |
| Permittivity* | ASTM D4491 | sec-1 | 0.7 |
| Water Flow* | ASTM D4491 | gpm/ft2 (l/min/m2) | 50 (2035) |
| A.O.S* | ASTM D4751 | U.S. Sieve (mm) | 100 (0.150) |
| UV Resistance | ASTM D4355 | %/hrs | 70/500 |
* At the time of manufacturing. Handling, storage, and shipping may change these properties.
| PACKAGING | |
| Roll Dimension (WxL) - Ft | 15 x 150 |
| Square Yards Per Roll | 250 |
| Estimated Roll Weight - lbs | 250 |
* At the time of manufacturing. Handling may change these properties.