SKAPS GT-180
SKAPS GT-180 is a needle-punched nonwoven geotextile made of 100% polypropylene staple fibers, which are formed i7to a random network for dimensional stability. SKAPS GT-180 resists ultraviolet deterioration, rotting, biological degradation, naturally encountered basics and acids. Polypropylene is stable within a pH range of 2 to 13. SKAPS GT-180 conforms to the physical values listed below:
| PROPERTY | TEST METHOD | UNIT | M.A.R.V. (Minimum Average Roll Value) |
| Weight (Typical) | ASTM D5261 | oz/yd2 (g/m2) | 8.0 (271) |
| Grab Tensile | ASTM D4632 | lbs (kN) | 205 (0.911) |
| Grab Elongation | ASTM D4632 | % | 50 |
| Trapezoid Tear Strength | ASTM D4533 | lbs (kN) | 85 (.378) |
| CBR Puncture Resistance | ASTM D6241 | lbs (kN) | 535 (2.38) |
| Permittivity* | ASTM D4491 | sec-1 | 1.35 |
| Water Flow* | ASTM D4491 | gpm/ft2 (l/min/m2) | 90 (3657) |
| A.O.S* | ASTM D4751 | U.S. Sieve (mm) | 80 (.180) |
| UV Resistance | ASTM D4355 | %/hrs | 70/500 |
* At the time of manufacturing. Handling, storage, and shipping may change these properties.
| PACKAGING | |
| Roll Dimension (WxL) - Ft | 12.5 x 360 / 15 x 300 |
| Square Yards Per Roll | 500 |
| Estimated Roll Weight - lbs | 250 |
* At the time of manufacturing. Handling may change these properties.