SKAPS Industries • 335 Athena Dr • Athens • GA 30601 • USA

 

 

 

 

 

 

 

 

 

 

 

SKAPS GT-135 is a needle-punched nonwoven geotextile made of 100% polypropylene staple fibers, which are formed into a random network for dimensional stability. SKAPS GT-135 resists ultraviolet deterioration, rotting, biological degradation, naturally encountered basics and acids. Polypropylene is stable within a pH range of 2 to 13. SKAPS GT-135 conforms to the physical values listed below:

PROPERTY TEST METHOD UNIT M.A.R.V. (Minimum Average Roll Value)
Weight (Typical) ASTM D5261 oz/yd2 (g/m2) 3.5 (119)
Grab Tensile ASTM D4632 lbs (kN) 90 (.401)
Grab Elongation ASTM D4632 % 50
Trapezoid Tear Strength ASTM D4533 lbs (kN) 40 (.178)
Puncture Resistance ASTM D4833 lbs (kN) 60 (.267)
Mullen Burst ASTM D3786 psi (kPa) 185 (1275)
Permittivity* ASTM D4491 sec-1 2.2
Water Flow* ASTM D4491 gpm/ft2 (l/min/m2) 150 (6095)
A.O.S.* ASTM D4751 U.S. Sieve (mm) 50 (0.3)
U.V. Resistance ASTM D4355 %/hrs 70/500

* At the time of manufacturing. Handling, storage, and shipping may change these properties.

PACKAGING
Roll Dimension (W x L) - Ft 12.5/15 x 360
Square Yards per Roll 500/600
Estimated Roll Weight - lbs 130/155

* At the time of manufacturing. Handling may change these properties.

This information is provided for reference purposes only and is not intended as a warranty or guarantee. SKAPS assumes no liability in connection with the use of this information.

 
Home :: Products :: Location :: Directions :: Jobs