SKAPS Industries • 335 Athena Dr • Athens • GA 30601 • USA

 

 

 

 

 

 

 

 

 

 

 

SKAPS GT-155 is a needle-punched nonwoven geotextile made of 100% polypropylene staple fibers, which are formed into a random network for dimensional stability. SKAPS GT-155 resists ultraviolet deterioration, rotting, biological degradation, naturally encountered basics and acids. Polypropylene is stable within a pH range of 2 to 13. SKAPS GT-155 conforms to the physical values listed below:

PROPERTY TEST METHOD UNIT M.A.R.V. (Minimum Average Roll Value)
Grab Tensile ASTM D4632 N 800
Grab Elongation ASTM D4632 % 50
Trapezoid Tear Strength ASTM D4533 N 220
Puncture Resistance ASTM D4833 N 360
Mullen Burst ASTM D3786 kPa 2000
Permeability ASTM D4491 cm/sec 0.03
A.O.S.* ASTM D4751 U.S. Sieve (mm) 100 (.15)
U.V. Resistance ASTM D4355 %/hrs 70/500

* At the time of manufacturing. Handling, storage, and shipping may change these properties.

PACKAGING
Roll Dimension (W x L) - Ft 12.5 x 360 / 15 x 300
Square Yards per Roll 500
Estimated Gross Roll Weight - lbs 200

* At the time of manufacturing. Handling may change these properties.

This information is provided for reference purposes only and is not intended as a warranty or guarantee. SKAPS assumes no liability in connection with the use of this information.

 
Home :: Products :: Location :: Directions :: Jobs